Cambridge Sensors microdot Specifikace stáhnout pdf (Strana 4)

BLOOD GLUCOSE METER OVERVIEW

This section provides general information on the Microdot Xtra Blood

Glucose Monitoring System

The Microdot Xtra Blood Glucose Monitoring

System is a portable whole blood testing

system which performs tests with quick

and accurate results.

It consists of three main parts:

1. Microdot Xtra Blood Glucose Meter

2. Microdot Xtra Test Strips

3. Microdot High and Low Control

Solution

These products have been designed,

tested and proven to work together

as a system to produce safe and

accurate results.

Use only Microdot Xtra Test Strips

and Control Solutions with the

Microdot Xtra Glucose Meter.

Your system includes:

Microdot Xtra Meter

Anti-microbial Meter Cover

Quality Assurance Manual

Warranty Registration Card

3V Lithium Battery (installed)

Additional components include:

Microdot Xtra Test Strips

Microdot Control Solutions

2

Chapter 1

Cambridge Sensors USA, LLC

®

Xtra

TROUBLESHOOTING THE METER

The blood glucose level is higher than

525 mg/dL.

The blood glucose level is lower than

20 mg/dL.

Error message that indicates that there

is a problem with the meter, e.g.,

measurement error (time out, overflow,

offset) or temperature out of range.

Error message that indicates that there

may be a problem with the test strip, e.g,

the test strip may be damaged, moved,

or removed during testing, or inserted

improperly.

Error message could be caused by a used

or damaged test strip.

Error message indicates serial

communications error.

The battery sign appears on the display

with the unit of measurement. The power

of the battery is getting low. You can

complete about 50 more tests from the

time this symbol first appears.

This message indicates very high

blood sugar. You should recheck the

blood glucose level. If “Hi” again,

follow facility protocol.

This message indicates very low

blood sugar. You should recheck the

blood glucose level. If “Lo” again,

follow facility protocol.

Review the instructions and try again

with a new test strip. If the problem

persists, contact Customer Service.

Check the test strip for damage and

retest as necessary. Repeat the test.

If the error message appears again,

contact Customer Service.

Repeat the test with a new strip.

If the error message appears again,

contact Customer Service.

If error persists, contact Customer

Service.

Test results will be accurate but

replace the battery as soon as

possible. Battery type is

CR2032 3 volt.

Chapter 9

25

Cambridge Sensors USA, LLC

®

Xtra

1 2 3 4 5 6 7 8 9 ... 30 31

Komentáře k této Příručce

Žádné komentáře